Pro UPI QR LogoPro UPI QR

Larger Display

A5 acrylic T-stand for longer-distance UPI scans

A5 (148 × 210 mm) is the step up from A6 when the customer stands farther away: temple donation desks, clinic waiting rooms, parking kiosks. The QR itself should grow with the paper, not stay a postage stamp on a big sheet.

Last reviewed 3 September 2026 · Amazon Associate link labelled below

Clear A5 acrylic T-stand with a gold base holding a Scan to Pay QR card

Typical street price

Under ₹450

Donation desks, clinics, parking kiosks, and billing counters past 1.5 m.

Print insert: A5 (148 × 210 mm) at 300 DPI, matte.

Check price on Amazon →Generate an A5 UPI poster →

Amazon Associate link — Pro UPI QR may earn from qualifying purchases. Prices change. This does not affect QR generation. See theeditorial policy.

A5 T-stand. Grow the QR module with the paper — a tiny code on a large sheet still fails at 5 feet.

Rule of thumb from the print-size guide: scan distance ÷ 10 ≈ minimum QR width in inches. A 5-foot counter wants about a 2-inch (5 cm) module. A5 gives you room for payee name, a short note, and that module without crowding.

Print at 300 DPI. PDF is the safer print-shop master because it keeps the A5 page box. PNG is fine for a home inkjet. Do not stretch an A6 screenshot onto A5.

Double-sided T-stands help if people approach from both sides of a donation table. Test-scan from the real queue position, not from your desk chair.

Specs that actually matter

Page
A5, 148 × 210 mm
QR module
About 2–3 in for 5-foot scans
Print
300 DPI PDF or PNG, matte
Base
T-stand, often double-sided

How to set it up

  1. Step 1

    Set A5 in the generator

    Use the homepage standee templates. Keep payee name short so the module stays large.

  2. Step 2

    Export PDF

    PDF keeps the A5 page box for a print shop. PNG is fine for home inkjet at 300 DPI.

  3. Step 3

    Insert and walk the queue

    Stand where the customer stands and scan from PhonePe and GPay.

Related print notes:UPI QR print size guide ·template gallery ·print hub

FAQ

A6 or A5 for a kirana billing desk?
A6 is enough at arm’s length. Choose A5 when the queue stands farther away or you want a larger payee name.
Can I print an A4 poster and trim it to A5?
You can, but the QR may end up off-centre. Better to export A5 from the generator so the module is composed for that page.
Does a larger standee scan better?
Only if the QR module is larger. A huge sheet with a 1 cm code is worse than a small A6 with a 3 cm code.
Is A5 an official NPCI size?
No. NPCI does not mandate one print size. A5 is a stationery size that happens to fit many acrylic T-stands.

Related hardware